BlueScope Distribution offer the most extensive range of Structural Steel products, Australia wide.
With usage ranging from the general engineering and fabrication market segments, through to the construction industry, our vast resources ensure that the best quality steel is always on hand for all your structural needs.
Structural Sections available comprise:
Angles - Cold-Formed Structurals - DuraGal® Angles (Equal)
DuraGal® Angles are high strength cold formed structural sections that are In-line Hot-dip galvanized over a prepared metal surface, to produce a fully bonded coating with a minimum average coating mass of 100g/m2, in accordance with AS/NZS 4791:1999 ILG100. The zinc surface then has a surface conversion coating applied. All equal angles larger than 50mmx50mm are coated with a clear polymer over the conversion coat.
Additional Information
Grade: C350L0, C400L0 & C450L0
Size Range: 30x30 CA to 150x150 CA
Thickness Range: 2.5mm to 8.0mm
Standard Length: 6.0m, 9.0m, 12.0m
Surface Finish: DuraGal® (In-Line, Hot-dip Galvanized)
Angles - Cold-Formed Structurals - DuraGal® Angles (Unequal)
DuraGal® Angles are high strength cold formed structural sections that are In-line Hot-dip galvanized over a prepared metal surface, to produce a fully bonded coating with a minimum average coating mass of 100g/m2, in accordance with AS/NZS 4791:1999 ILG100. The zinc surface then has a surface conversion coating applied. All unequal angles are coated with a clear polymer over the conversion coat.
Additional Information
Grade: C400L0 & C450L0
Size Range: 75x50 CA to 150x100 CA
Thickness Range: 4.0mm to 8.0mm
Standard Length: 9.0m, 12.0m
Surface Finish: DuraGal® (In-Line, Hot-dip Galvanized)
Angles - Cold-Formed Structurals - DuraGal® Plus for Lintels
DuraGal® Plus for Lintels are high strength cold formed structural angle sections that are In-line Hot-dip galvanized over a prepared metal surface, to produce a fully bonded coating in accordance with AS/NZS 4791:1999 ILG300. The zinc surface then has a surface conversion coating applied.
Additional Information
Grade: C400L0 & C450L0
Size Range: 100x100, 150x100
Thickness Range: 6.0mm, 8.0mm
Surface Finish: DuraGal® Plus AS/NZS 4791:1999 ILG300
Angles - Hot-Rolled Structurals - Angles (Equal)
Hot Rolled Structural Steel sections are manufactured in accordance with the requirements of Australian/New Zealand Standard AS/NZS 3679.1 Structural steel – Hot-rolled bars and sections.
Grades other than shown below may also be available depending upon section and quantity requirements. For information on manufacturing tolerances please refer to AS/NZS 3679.1.
Additional Information
Size Range: 25x25 EA to 200x200 EA
Standard Length: 7.5m, 9.0m, 10.5m, 12.0m, 13.5m, 15.0m
Thickness Range: 3mm to 26mm
AS Standard: AS/NZS 3679.1
Angles - Hot-Rolled Structurals - Angles (Unequal)
Hot Rolled Structural Steel sections are manufactured in accordance with the requirements of Australian/New Zealand Standard AS/NZS 3679.1 Structural steel – Hot-rolled bars and sections.
Grades other than shown below may also be available depending upon section and quantity requirements. For information on manufacturing tolerances please refer to AS/NZS 3679.1.
Additional Information
Size Range: 65x50 UA to 150x100 UA
Standard Length: 7.5m, 9.0m, 10.5m, 12.0m, 13.5m, 15.0m
Thickness Range: 5mm to 16mm
AS Standard: AS/NZS 3679.1
Beams - Hot-Rolled Structurals - Tapered Flange Beams
Hot Rolled Structural Steel sections are manufactured in accordance with the requirements of Australian/New Zealand Standard AS/NZS 3679.1 Structural steel – Hot-rolled bars and sections.
Grades other than shown below may also be available depending upon section and quantity requirements. For information on manufacturing tolerances please refer to AS/NZS 3679.1.
Additional Information
AS Standard: AS/NZS 3679.1
Grade: 300PLUS®, AS/NZS 3679.1-350
Size Range: 100 TFB and 125 TFB
Standard Length: 9.0m, 12.0m
Beams - Hot-Rolled Structurals - Universal Beams
Hot Rolled Structural Steel sections are manufactured in accordance with the requirements of Australian/New Zealand Standard AS/NZS 3679.1 Structural steel – Hot-rolled bars and sections.
Grades other than shown below may also be available depending upon section and quantity requirements. For information on manufacturing tolerances please refer to AS/NZS 3679.1.
Additional Information
AS Standard: AS/NZS 3679.1
Grade: 300PLUS®, AS/NZS 3679.1-350
Size Range: 150 UB to 610 UB
Standard Length: 9.0m, 10.5m, 12.0m, 13.5m, 15.0m, 16.5m, 18.0m, 20.0m
Beams - Hot-Rolled Structurals - Universal Bearing Piles
Hot Rolled Structural Steel sections are manufactured in accordance with the requirements of Australian/New Zealand Standard AS/NZS 3679.1 Structural steel – Hot-rolled bars and sections.
Please note that these sections are not generally stocked and are available only for projects subject to enquiry. For information on manufacturing tolerances please refer to AS/NZS 3679.1.
Additional Information
AS Standard: AS/NZS 3679.1
Grade: 300PLUS®, AS/NZS 3679.1-350
Size Range: 200 UPB and 310 UBP
Beams - Welded Sections - Welded Beams
These sections are welded from plate and are manufactured in accordance with Australian/New Zealand Standard AS/NZS 3679.2 Structural steel – Welded I sections.
Grades other than shown below are subject to enquiry. For information on manufacturing tolerances please refer to AS/NZS 3679.2.
Additional Information
AS Standard: AS/NZS 3679.2
Grade: 300PLUS®, AS/NZS 3679.2-400
Size Range: 700 WB to 1200 WB
Standard Length: 9.0m, 10.5m, 12.0m, 13.5m, 15.0m, 16.5m, 18.0m
Columns - Hot-Rolled Structurals - Universal Columns
Hot Rolled Structural Steel sections are manufactured in accordance with the requirements of Australian/New Zealand Standard AS/NZS 3679.1 Structural steel – Hot-rolled bars and sections.
Grades other than shown below may also be available depending upon section and quantity requirements. For information on manufacturing tolerances please refer to AS/NZS 3679.1.
Additional Information
AS Standard: AS/NZS 3679.1
Grade: 300PLUS®, AS/NZS 3679.1-350
Size Range: 100 UC to 310 UC
Standard Length: 9.0m, 10.5m, 12.0m, 13.5m, 15.0m, 16.5m, 18.0m, 20.0m
Columns - Welded Sections - Welded Columns
These sections are welded from plate and are manufactured in accordance with Australian/New Zealand Standard AS/NZS 3679.2 Structural steel – Welded I sections.
Grades other than shown below are subject to enquiry. For information on manufacturing tolerances please refer to AS/NZS 3679.2.
Additional Information
AS Standard: AS/NZS 3679.2
Grade: 300PLUS®, AS/NZS 3679.2-400
Size Range: 350 WC to 500 WC
Standard Length: 9.0m, 10.5m, 12.0m, 13.5m, 15.0m, 16.5m, 18.0m
Channels - Cold-Formed Structurals - DuraGal® Channels
DuraGal® Channels are high strength cold formed structural sections that are In-line Hot-dip galvanized over a prepared metal surface, to produce a fully bonded coating with a minimum average coating mass of 100g/m2, in accordance with AS/NZS 4791:1999 ILG100. The zinc surface then has a surface conversion coating applied. All channels are coated with a clear polymer over the conversion coat.
Additional Information
Grade: C400L0 & C450L0
Size Range: 75x40 CC to 300x90 CC
Thickness Range: 4.0mm to 8.0mm
Standard Length: 9.0m, 12.0m
Surface Finish: DuraGal® (In-Line, Hot-dip Galvanized)
Hollow Sections:
Circular
DuraGal® CHS
Galtube Plus® CHS - Painted *
Galtube® Plus CHS
Tubeline® CHS
Rectangular
DuraGal® RHS
Galtube® Plus RHS
Tubeline® RHS
Square
DuraGal® SHS
Galtube® Plus SHS
Tubeline® SHS
- Please refer to the Resources & Tools for a list of all materials available.
- Please feel free to consult your local BlueScope Distribution sales office for any queries you may have (refer our Locations).
- DuraGal® and 300PLUS® are registered trademarks of OneSteel Trading Pty Limited.
Aluminium